Recently Sold Cattle Mixer Wagons
The mixer wagons (also generically known as feeder wagons or diet feeders) that appear on this page have been sold. If you are looking for feeder wagons we have for sale click this link. However, if you find a wagon that you are looking for below that fulfils your feeding requirments please contact us. We quite o ften have mixer wagons, including vertical tub mixers, coming in that will meet your requirements.
Feeding dairy bulls a high concentrate diet? Still using expensive compound feeds? Make your own blend to improve your bottom line.
Another good starter wagon, ideal for blends, silage based TMR.
For the past 6-7 years this West Diet Feeder has only been used to feed over the winter months on a 130 cow dairy unit.
Located in Herefordshire and is now available for delivery.
Three winters have been completed on the existing belly liner.
Electronic scales working.
Width: Approx. 6'3" with discharge set-up sticking out a further 2' (This will easliy clear neck rail) 8' overall.
Length: Approx. 5.7m
Height:Approx 9'
Excellent back-up wagon, could be used just to mix caustic grains, blends etc.
CAUSTIC GRAIN TREATMENT:Fast beating discharge fingers break down lumps caused during the treatment process at point of discharge.
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
2009 KEENAN Mech Fiber 400 £POA plus VAT
Second hand, serviced, Keenan 400 feeder for sale. Located in Hereford.
The 28m³ Keenan Mech Fiber 400 (MF400) will feed circa 10 ton of TMR or 180-200 dairy cows or circa 400+ (500kg) steers. Based on a single TMR ration compiled by the Owen Cattle Company.
- Specifications: Quoted Capacity 28m³, Approximate mixing capacity 25m³ 6 Paddle, Blades, Paddle Rubbers, Digital Scales, Standard Tray with Magnets, Super Single Tyres (R22.5), Dual Axle, Steering Axle.
- Optional Extras Fitted: Steering Axle, Bale Handler Series 2 (Tynes & Ring removed, Creel board still on)
- Additional Optional Extras Available: Extra Blades, Heavy Duty Blades, Risers, Heavy Duty Top Knife
- Full service completed, primary belly at 99% thickness, hardox belly liner getting thin (fitted new at factory)
- UK Finance: T&C apply, please contact for more details.
- Warranty available
Width: 3.0m
Length: 7.5m-8.0m
Height: 3.8m
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
2010 KEENAN MECH FIBER (RECONDITIONED) £POA plus VAT
Reconditioned (Eco Refurb) Keenan Mech Fiber 320
Ready to go! Full service and reline completed. New blades, paddle rubbers, hardened steel reline belly plate and fold down tray. The Mech Fiber 320 is the latest model Keenan KlassiK 140.
The 14m³ Keenan Mech Fiber 320 will feed circa 85 dairy cows or circa 170 (500kg) steers. Based on a single TMR ration compiled by the Owen Cattle Company.
- Specifications:12.5m³, 6 Paddle, Blades, Paddle Rubbers, Digital Scales, Fold Down Tray, Super Single Tyres (R22.5)
- Optional Extras Fitted: Fold Down TrayN/A
- Additional Optional Extras Available: Extra Blades, Heavy Duty Blades
- UK Finance: Trade ins considered
- Warranty available
Keenan Klassik 100 Bale Handler £POA plus VAT
Fully Serviced Keenan 100 Bale Handler with new belly reline and end plates, six paddle with paddle rubbers and VFC guillotine door (opens downwards). Fold down tray enables user to enter building with tray in up or down position and can be used to feed over a neck rail or into hay rings.
With a bulk density around 400kg/m3 this wagon will mix around 3 ton.
Currently in Hereford.
Width: 2.49m or 98 inches
Length: 5.1m or 199 inches
Height:TBC
Discharge Height:1.58m (Height of hinge to floor)
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
This 22m3 will handle bales, silage, blends, caustics, root crops. Can discharge to the left and right. Small conveyor on right hand side (RHS) that is ideal for feeding into a bunker or trough.
With a bulk density around 400kg/m3 this wagon will mix around 8.5 ton.
Located in Hereford can be offered as-is or fully serviced and is ready for delivery.
Width: NA
Length: NA
Height:NA
Beef Nutrition:For those unfamiliar with feeding and getting the most out of your mixer wagon we offer six months nutrition as part of the package.
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
Hi Spec Vertical 16 £POA plus VAT
Serviced Hi Spec V16 vertical tub, single auger, front door with dual direction conveyor and side shift, RHS door, two speed reduction gearbox.
With a bulk density around 400kg/m3 this wagon will mix around 6 ton.
Currently in Hereford.
Width: 2.75m
Length: 5.1m
Height:3.05m (10ft)
Discharge Height:0.85m (Height off floor)
Width at tyres: 2570mm or (101in or 8ft 5in) Clearance
Height Ex-extension: 2800mm (9ft 2in)
Conveyor Clearance: 660mm or (26 ft 2in)
Top conveyor: 860mm or 34in (2 ft 10in) Length:
Hitch-axle: 4650mm or (15 ft 1in)
Hitch-base of tub: 5700mm or (18 ft 6in)
Hitch-top of tub: 6150mm or (20 ft 2in)
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
This 22m3 will handle bales, silage, blends, caustics, root crops. Can discharge to the le ft and right or into a ring feeder from the LHS.
With a bulk density around 400kg/m3 this wagon will mix around 8.5 ton.
Located in Scotland can be offered as-is or serviced and is ready for delivery.
Width: 2.3m
Length: 7.8m
Height: 3.03m
Beef Nutrition:For those unfamiliar with feeding and getting the most out of your mixer wagon we offer six months nutrition as part of the package.
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
BVL V MIX 10 £POA plus VAT
Refurbished BVL V Mix 10 Single Vertical Auger, x2 side doors, Complete service, New Load Cell Indicator, New Blades, Auger flighting relined with 10mm plate.
With a bulk density around 400kg/m3 this wagon will mix around 4 ton.
Currently in Hereford.
Width: 2.6m (Body 2.4m)
Length: 5.1m
Height:2.6m
Discharge Height:0.8m (Height of floor)
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
Thinking about giving TMR a go? This 14m3 will handle bales, silage, blends, caustics, root crops. Can discharge to the le ft and right. Will throw through barriers or into a five foot trough.
With a bulk density around 400kg/m3 this wagon will mix around 5 ton.
Located in North Wales can be offered as-is or fully serviced and is ready for delivery.
Width: NA
Length: NA
Height:NA
Beef Nutrition:For those unfamiliar with feeding and getting the most out of your mixer wagon we offer six months nutrition as part of the package.
Contact: Sam Owen +44 (0) 7528 436 163 or please use our Diet Feeder Request Page »
FULL REFURB TATOMA MV 24 DUPLO £POA plus VAT
Fully Refurbished Tatoma MV 24 Duplo
Very tidy wagon with relined walls and new screws. Hiring contracts now available please get in touch to discuss
The 24m³ Tatoma will feed circa 10 ton of TMR or 200 dairy cows or circa 450 (500kg) steers. Based on a single TMR ration compiled by the Owen Cattle Company.
- Specifications: Quoted Capacity 24m³, Approximate mixing capacity 22m³ 2 Vertical Screw Augers, Full set of Knives, Restrictor Plates, Lined walls, New Screws Super Single Tyres (R19), Dual Axle.
- Optional Extras Fitted: Dual Direction Conveyor
- Additional Optional Extras Available: N/A
- UK Finance: T&C apply, please contact for more details.
- Warranty available
KEENAN Klassik II 140 £3,250 plus VAT
Keenan Klassik 2, 140 feeder wagon, recently relined. To be sold as seen.
A cheap Keenan Feeder in working order. Scales working, would suit a farm looking for a backup machine or a wagon just to do blends, wash root crops, caustic ingredients.
Paddles are bent but could be straighten with a couple of jacks.
Still on-farm in Buckinghamshire.
The 14m³ Keenan Klassik 140 II is approximately 12.5m³ and will feed around 4 ton of TMR or about 80-85 dairy cows. Would mix about 4-5t of blend for a barley beef ration for bulls, with a bit of straw and protein molasses added.
- Specifications:14m³ (Usable: 12.5m³), 4 Paddle, Blades (can be fitted), Paddle Rubbers, Digital Scales, Super Single Tyres (R22.5)
Not into emails and technology?
Call Sam on 07528 436 163 regarding your wagon specifications.
For overseas farmers and dealers call +44 7528 436 163 or +442921 256 936
If you don't mind a bit of typing and technology please fill in our enquiry page below with your request. Diet Feeder Request Page »
